The bolt handle is reciprocating it cycles with every shot fired. Gear Head Works has a new side-folding brace as well that works great with this pistol. There are three slots in the pistol’s rear rail, so you can adjust the height at which you mount whichever brace you elect to attach. I would guess almost all buyers will end up clamping an arm brace onto that section of rail, and for testing I attached a side-folding FS1913 brace from SB Tactical, the original inventors of the arm brace. The spacer has a vertical section of Picatinny rail, which is left bare. The receiver extension and the additional spacer piece directly behind the receiver-which sports QD sling swivel sockets on both sides-are aluminum. To control recoil, designers used a sliding tungsten weight inside the bolt that works like a dead-blow hammer, which they refer to as their “dead-blow action.” The Ruger has a somewhat small bolt, and the distance it travels is short. Unfortunately, more reciprocating weight usually means more recoil. Most 9mm carbines are straight blowback-operated, and to tame the recoil of the cartridge, weight is added to the bolt. However, unless you’re using current Glock magazines compatible with a reversible mag release, they won’t work if you reverse the mag release. The magazine release is a simple push-button on the side of the magazine well, and it is reversible. You’ll have to tug on the bolt handle to free it from the bolt stop once you’ve replaced an empty magazine with a loaded one. The bolt locks back on empty magazines, and you can lock the bolt back by pushing up on the tab while pulling the bolt to the rear. The bolt stop is a metal tab just forward of the trigger guard. The receiver is exactly the same, only the barrel length and whether it’s a brace or stock at the rear mark the difference. The PC Charger uses the same operating system as the longer Carbine. The receiver with the barrel removed is just 10.75 inches long, making it very compact for storage and transport. The muzzle is threaded 1/2x28 and comes with a thread protector. At first I found its appearance and positioning odd, then I discovered my support hand fit perfectly between the handstop and the magazine well. The mag wells are straight drop-in replacements, and swapping the Ruger for the Glock mag well or vice-versa requires no tools.Īn aluminum handstop manufactured by UTG is provided with the pistol, and it’s mounted on the underside of the handguard. The receiver then lifts out of the chassis, and it is inside the latter where you’ll find the magazine well. The metal receiver sits inside the polymer chassis, and if you want to swap out the magazine well, you have to undo two bolts: one at the bottom front of the receiver and one at the top rear. The factory installed magazine well fits the provided Ruger magazine (l.), but Ruger also includes a drop-in well for Glock mags, which are not supplied. On the Glock side, magazine options are far more extensive and range from the short 10-round magazines meant for the G26 to the extended 33-round magazines originally built for the select-fire G18-plus the extra-capacity base pads made by TTI, Taylor Freelance, Springer Precision and others. The Ruger magazines work perfectly, but you’re limited to factory capacities, which top out at 17. Ruger also provides an additional magazine well that accepts double-stack Glock 9mm magazines. From the factory it is set up to accept Ruger SR/Security-9 magazines, and one 17-round Ruger magazine is included. The pistol ships with an interchangeable internal mag well. The barrel is situated inside an aluminum handguard with M-Lok attachment slots at three, six and nine o’clock. Once you lock back the bolt, detaching the barrel takes about a second and a half. Just like every other version of the PC Carbine, the barrel and handguard quickly detach from the receiver via Ruger’s quick takedown barrel. The PC Charger sports a 6.5-inch barrel, a 16.5-inch overall length and a weight of 5.2 pounds. Six months later Ruger announced the PC Charger, and just like Ruger’s new 57 pistol, it seems to be an immediate hit with consumers. I emailed my contact at Ruger and suggested this, and I learned the project was already in the works. Just shorten the barrel and swap the stock for a brace or just leave the rail bare. Instead of a traditional stock, the Chassis model sported an AR-style pistol grip and a Picatinny rail at the rear of the gun to which the AR-style stock was clamped.Īfter studying the takedown barrel and how the stock was attached, it seemed clear that making a pistol version of the Chassis model would be a quick and easy proposition. Ruger’s PC Carbine Chassis Model came out in 2019, and I wrote it up for RifleShooter magazine, our sister publication. Ruger has seen huge success with its PC Carbine, and the new PC Charger is a pistol version of the Chassis model of the carbine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |